China Professional V Belt Are Widely Used in Various Transmission Devices with Great quality

Product Description

 

Product Description

 

Structure

Top rubber:  NR,SBR
Reinforcement:  Polyester cord

Buffer rubber:  NR,SBR

Bottom rubber:  NR,SBR

Outside fabric:  Polyester cotton canvas

Applications:
— Blending systems
— Choppers
— CZPT systems
— Lawnmowers
— Compressors
— Crushers
— Scarifier

 

Model Technical parameters
Thickness Minimum wheel diameter 1% Elongation Maximum tension Base thickness
Powerful endless belt DH-15 1.5 25 4.0 12 0.6
DH-20 2.0 35 4.0 12 0.6
DH-30 3.0 35 5.0 20 1.2
DH-40 4.0 35 4.0 12 0.8
DH-50 5.0 60 7.5 16 1.0
DH-LTI 4.0 35 7.5 12 0.8
DH-LTI 4.0 35 7.5 14 1.0
DH-LTI 4.0 60 7.5 17 1.0

Type

Top width

Pitch width

Height

Length range

Angle

mm

mm

mm

mm

Z/FM/O

10

8.5

6

280—2480

40°

A

13

11

8

330—8000

40°

B

17

14

11

457—17000

40°

C

22

19

14

700—17000

40°

D

32

27

19

1100—17000

40°

E

38

32

23

3300—17000

40°

The EP conveyor belt consisting of 1-6 EP fabric plies, EP rubber conveyor belt has the same merit as Nylon conveyor belt. Its tensile body is made of warp polyester and weft-knitted canvas. Its performance is characterized by low elongation in the warp direction and excellent groove formation in the weft direction. The wet strength does not decrease, no mildew occurs, the initial modulus of the polyester is high, and a lower safety factor can be taken. It is suitable for conveying materials under medium and long-distance and high load and high-speed conditions.

 

 

 

Detailed Photos

 

Product Parameters

 

GB/T 7984
DIN 22102
JISK 6322
AS 1332-2000
SANS 1173:2005
BS 490

 

Carcass fabric type  Strength per ply (N/mm)   Thickness per ply (mm) Cover Thickness (mm) No.of Ply Belt Width (mm)    Length per Roll (m/Roll) 
Top Cover  Bottom Cover
NN NN100 100 0.70 3
3
3.2

4
4.5
4.8

6
6
6.4

7.9
8
9.5
       

1.5
3
1.6

2
4.5
1.6

2
6
3.2

3.2
4
3.2
       

2-10 300-12000 20-100
NN125 125 0.70
NN150 150 0.75
NN200 200 0.90
NN250 250 1.15
NN300 300 1.25
NN400 400  1.50
EP EP100 100  0.75 2-8
EP125 125  0.75
EP150 150  0.85
EP175 175  0.85
EP200 200  1.00
EP250 250  1.20
EP300 300  1.35
EP350 350  1.50
EP400 400   1.65
EP500 500   2.00
CC CC56 56 1.10 3-12

 

Standards Cover Rubber Adhesion
Tensile Strength Elongation at break Abrasion Cover to Ply Cover to Ply Ply to Ply
DIN 22102 Mpa % mm3 N/mm        N/mm  (>1.5mm) N/mm
DIN 22102-Z 15 350 250 3.5 4.5 5
DIN 22102-W 18 400 90 3.5 4.5 5
DIN 22102-Y 20 400 150 3.5 4.5 5
DIN 22102-X 25 450 120 3.5 4.5 5

 

rds Cover Rubber Adhesion
Tensile Strength Elongation at break Abrasion Cover to Ply Cover to Ply Ply to Ply
RMA Mpa % mm3 N/mm   (≤1.6mm) N/mm  (>1.6mm) N/mm
RMA-I 17 400 200 3 4.4 4
RMA-II 14 400 250 3 4.4 4

 

Standards Cover Rubber Adhesion
Tensile Strength Elongation at break Abrasion Cover to Ply Cover to Ply Ply to Ply
AS 1332 Mpa % mm3 N/mm       (≤1.9mm) N/mm  (>1.9mm) N/mm
AS 1332-N17 17 400 200 4 4.8 6
AS 1332-M24 24 450 125 4 4.8 6

 

 

Certifications

Packaging & Shipping

 

 

Company Profile

ZheJiang CZPT Rubber Products Co., Ltd is a leading professional manufacturer of conveyor belts & conveyor accessories in China. The main workshops cover 20,000 square meters in the total 60,000 square meters of the plant. The applied technology and equipment in the advanced production lines are state of the art in the industry. The sales headquarters is located in the capital of China, ZheJiang with branches in domestic and abroad.

It specializes in following 3 series: 1) Heavy-duty Conveyor Belt, including universal EP/NN and CC Belt, Chevron Belt, Oil Resistant Belt, Abrasion Resistant Belt, Heat Resistant Belt, Fire Resistant Belt, Chemical Resistant Belt, Sidewall Belt, Flat Transmission Belts, 2) Rubber Sheets, including SBR, NBR, NR, CR, EDPM, Rubber With Insertion 3) Conveyor accessories. These 3 series of products conform to RMA, DIN, ASTM and ISO specifications.

Its products, honored with “The most Advanced level of Products” by the Committee of Science and Technology, have been widely used in mining and quarrying, power stations, steel plants, bulk cargo terminals, cement industry, and other material handling fields. With great success in domestic market, it has been focusing on global market with several hundreds of foreign valued customers in Asia, South America, North America, Africa and Europe.

The company mission:
1.Supply one-stop outstanding service to global customers.
2. Engage in complete solutions with conveyor belting and power transmission belting.
3. Persist in technology improvement and quality control in the whole process of production and service.

After Sales Service

 

FAQ

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Type: NN200
Material: Rubber
Inside Material: Fabric
Feature: Oil-Resistant, Acid And Alkali Resistant, Tear-Resistant, Heat-Resistant, Cold-Resistant, Wear-Resistant
Tensile Strength: Strong
Warp: Polyester
Samples:
US$ 1.9/Meter
1 Meter(Min.Order)

|
Request Sample

v belt

What are the best practices for storing spare V-belts to maintain their quality?

Proper storage of spare V-belts is essential to maintain their quality and ensure their performance when they are needed. Here are some best practices for storing spare V-belts:

  1. Clean and Dry Environment:
  2. Store the V-belts in a clean and dry environment to prevent contamination and moisture damage. Avoid storing them in areas where they may be exposed to dirt, dust, chemicals, or excessive humidity. Keeping the storage area clean and well-ventilated helps preserve the integrity of the belts.

  3. Temperature and Humidity Control:
  4. Ensure that the storage area has controlled temperature and humidity levels. Extreme temperatures or high humidity can adversely affect the belt material, leading to deterioration or loss of elasticity. Ideally, the temperature should be kept within a range of 10°C to 30°C (50°F to 86°F), and the humidity should be maintained at around 40% to 70%.

  5. Avoid Direct Sunlight:
  6. Direct exposure to sunlight can cause the belt material to degrade over time. Store the spare V-belts away from direct sunlight or any other sources of ultraviolet (UV) radiation. If possible, use opaque containers or covers to shield the belts from light.

  7. Avoid Bending or Twisting:
  8. Do not store the V-belts in a way that causes excessive bending or twisting. This can result in permanent deformation or stress on the belts, compromising their performance. Keep the belts flat or hang them in a manner that maintains their original shape.

  9. Proper Packaging:
  10. If the V-belts are stored in packaging, ensure that the packaging is intact and provides adequate protection against external elements. Avoid storing the belts in damaged or torn packaging, as it may expose them to contaminants or moisture.

  11. First-In-First-Out (FIFO) Rotation:
  12. Implement a first-in-first-out (FIFO) rotation system for spare V-belts. This means using the oldest belts first and replenishing the stock with newly purchased belts. This practice helps prevent the storage of belts for extended periods, reducing the risk of degradation or obsolescence.

  13. Regular Inspections:
  14. Periodically inspect the stored V-belts for any signs of damage, such as cracks, brittleness, or deterioration. If any issues are detected, replace the affected belts promptly to ensure that only high-quality spare belts are available for use when needed.

By following these best practices, you can maintain the quality and performance of spare V-belts, ensuring that they are ready for use and prolonging their service life.

v belt

How do you troubleshoot common issues with V-belts, such as slipping or squealing?

Troubleshooting common issues with V-belts, such as slipping or squealing, is essential to maintain the proper operation and efficiency of the belt drive system. Here are some troubleshooting steps to address these issues:

  1. Slipping:
  2. Slipping occurs when the V-belt fails to maintain proper traction with the pulleys, resulting in reduced power transmission and potential belt wear. To troubleshoot slipping issues:

    • Check the belt tension: Insufficient tension is a common cause of slipping. Ensure that the V-belt is properly tensioned according to the manufacturer’s recommendations. Adjust the tension by using the appropriate tensioning method or tools.
    • Inspect for wear or damage: Examine the V-belt for signs of wear, cracks, fraying, or other damage. A worn-out belt may not provide adequate grip and can lead to slipping. Replace the belt if necessary.
    • Check pulley alignment: Misaligned pulleys can cause the belt to slip. Verify that the pulleys are properly aligned both parallel and angularly. Adjust the pulley positions if misalignment is detected.
    • Assess pulley condition: Worn or damaged pulleys can contribute to belt slipping. Inspect the pulleys for wear, rough surfaces, or damage. If needed, replace the pulleys to ensure proper belt engagement.
    • Verify the load and application: Excessive loads or improper application can cause the belt to slip. Ensure that the belt drive system is designed and rated for the specific load requirements.
  3. Squealing:
  4. Squealing noises from V-belts are often caused by vibrations, misalignment, or improper tension. To troubleshoot squealing issues:

    • Check belt tension: Insufficient or excessive belt tension can lead to squealing. Adjust the tension to the recommended range specified by the manufacturer.
    • Inspect for wear or contamination: Check the V-belt for signs of wear, glazing, or contamination. Worn or contaminated belts may produce squealing noises. Replace the belt if necessary and eliminate any contamination from the belt or pulleys.
    • Examine pulley condition: Damaged or worn pulleys can create noise. Inspect the pulleys for wear, damage, or rough surfaces. Replace any worn or damaged pulleys.
    • Verify pulley alignment: Misaligned pulleys can cause the belt to run at an angle, resulting in noise. Ensure that the pulleys are correctly aligned both parallel and angularly. Adjust the pulley positions if misalignment is detected.
    • Check for belt glazing: Belt glazing occurs when the belt’s contact surface becomes smooth and glossy, reducing traction. If glazing is present, roughen the belt’s surface with fine sandpaper or replace the belt if necessary.
    • Assess environmental factors: Environmental conditions, such as excessive heat or humidity, can affect belt performance. Ensure that the belt drive system operates within the recommended temperature and humidity ranges.

By following these troubleshooting steps, you can identify and address common issues with V-belts, such as slipping or squealing. Regular maintenance, proper tensioning, and alignment are crucial for ensuring the smooth and efficient operation of the belt drive system.

v belt

How do you properly install and tension a V-belt for optimal performance?

Proper installation and tensioning of a V-belt are crucial for achieving optimal performance and ensuring its longevity. Here are the steps to properly install and tension a V-belt:

  1. Select the appropriate V-belt: Determine the correct V-belt size and type based on the application requirements, including pulley diameters, power transmission needs, and environmental factors.
  2. Clean the pulleys: Ensure that the pulleys are clean and free from any contaminants, such as dirt, debris, or oil. Clean the pulley grooves using a brush or compressed air to ensure proper belt grip.
  3. Inspect the pulleys: Check the pulleys for any signs of wear, damage, or misalignment. Replace or repair any damaged or worn-out pulleys before proceeding with the installation.
  4. Place the V-belt on the pulleys: Position the V-belt on the pulleys, ensuring that it is properly seated in the pulley grooves. Make sure the belt is correctly aligned with the pulleys and is not twisted or kinked.
  5. Adjust the center distance: If necessary, adjust the center distance between the driving and driven pulleys to the recommended specifications provided by the manufacturer. This ensures proper belt tension and alignment.
  6. Tension the V-belt: The correct tension is crucial for optimal V-belt performance. Use a tension gauge to measure the belt’s tension. Follow the manufacturer’s guidelines or recommended tension specifications for the specific V-belt type and application.
  7. Apply tension gradually: Apply tension to the V-belt gradually and evenly. Avoid sudden or excessive tensioning, as it can lead to belt damage or pulley misalignment. Follow the recommended tensioning procedure provided by the manufacturer.
  8. Check the belt tension: After tensioning the belt, recheck the tension using a tension gauge. Ensure that the tension falls within the recommended range for the specific V-belt type and application. Adjust the tension if necessary.
  9. Verify alignment: Confirm that the pulleys are aligned properly. Check for any misalignment or belt tracking issues. Make adjustments as required to ensure the belt runs smoothly and centrally on the pulleys.
  10. Perform a test run: After installation and tensioning, perform a test run of the V-belt system. Monitor the belt’s performance, including proper grip, minimal vibration, and absence of noise. Address any issues or abnormalities promptly.

It is important to refer to the manufacturer’s guidelines and specifications for the specific V-belt type and application. They may provide additional instructions or considerations for installation and tensioning.

By following these steps and adhering to the manufacturer’s recommendations, you can ensure the proper installation and tensioning of a V-belt, leading to optimal performance, reduced wear, and extended belt life.

China Professional V Belt Are Widely Used in Various Transmission Devices   with Great quality China Professional V Belt Are Widely Used in Various Transmission Devices   with Great quality
editor by CX 2024-04-24