China Standard Z10 Power Twist Drive Link V Belt for Power Transmission with Hot selling

Product Description

                                 Z10 Power Twist Drive Link V Belt for Power Transmission 

 

Product Description

Power twist is individual links made of high performance polyurethane/polyester CZPT material. Links are connected and secured together by hand using a twist-lock design.

Detailed Photos

 

Product Parameters

 

Belt Model

Z10

Color

Red

Material

Polyurethane

Nuts

Without

Operating temperature

-20-80 ºC

 

Our Advantages

 

Longer Belt Life in Harsh Operating Conditions

Our link belt adopts high performance polyurethane and polyester CZPT materials which guarantee excellent durability in harsh conditions. They will outperform conventional rubber V belts in handling hostile environments, including exposure to oil, grease, water and so on. They are also more resistant to abrasion and will operate, with no loss in performance, at a more extreme temperature range from -40°C to 90°C.

Reduced Belt Stock…Any Belt, Any Time

There’s no need to maintain inventory of numerous different endless V belts to cover all your drives. Carry a box in stock of each common size and you’re almost 100% covered with a significant reduction in working capital tied up in spares.
 

Easier and Faster Installation

Unique “quick connect” belt designs provide for easier and faster belt installation, even on captured or restricted access drives – no tools required. Belts are easily made up to the required length, by hand, in seconds and can be rolled CZPT a drive just like a bicycle chain. No need to dismantle drive components or change existing pulleys.

Minimized Maintenance Time

Power twist drive belt has no need to re-10sion. All other power transmission belts, require re-10sioning after an initial “run in” period. But power twist drive has eliminated that step by pre-seating the tabs on the belt, therefore once you install the belt properly PT Drive is a Fit it and Forget It option.
 

 

Reduced Drive Vibration & System Noise

Link belt do not have the continuous tension cords found in conventional endless belts. As a result, transmitted vibration in the drive system can be reduced by 50% or more. Consequently, system noise is reduced and, as a bonus, bearing life extended.

 

Company Profile

 

Xuanze Industrial Drive Systems (ZheJiang ) Co., Ltd.,

Xuanze Industrial is a production of industrial conveyor belt, belt, to help tape and technology development of modern science and technology enterprises, the company has a standard production workshop of 2,000 square meters, the company employees 40 people, sales staff of ten.

With more than 10 industrial belt patents, our company develops and produces seamless PU tapes to break the monopoly of the industry in Europe and the United States. It has surpassed Europe and the United States in application. SIBR-5M synchronous silicone tape developed for the hygiene products industry, silicone and timing belt with high bonding strength, no cracks, no dust.

Break Japan’s NITTA monopoly on the hygiene products industry, our company’s imports of silicone conveyor belt wear resistance, anti-expansion force, the advantages of high visual detection accuracy.

 

Certifications

 

XZ belt has got many paents, and we are authorized as High-tech Enterprise by ZheJiang Government.

Packaging & Shipping

 

                 XZ will customized every customer’s parcel package, try to reduce the parcel volume to save freight cost.
 

FAQ

 

1. Is your company a manufacturer or a trading company?

We are manufacturers and have our own factory located in HangZhou.

2. What is your lead time?

Generally it takes 3 to 5 days. The exact delivery time depends on the specific items and demanded quantity.

3. What terms does your company use in our international trade?

We usually do business in EXW works and door-to-door express . But if you have special requirement, we can also do in your convenience.

4. Can I get a sample first?

Of course, you can get a sample first, I make sure you will reorder and be happy with our high quality sample products.

5. Does your company provide OEM service?

Sure. Not only color, thickness, but also texture and design.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Standard or Nonstandard: Standard
Application: Textile Machinery, Conveyer Equipment, Packaging Machinery, Food Machinery, Marine, Mining Equipment
Feature: Oil-Resistant, Corrosion-Resistant, Wear-Resistant
Tensile Strength: Strong
Material: PU
Type: V Belt
Customization:
Available

|

Customized Request

v belt

Are there any specific guidelines for aligning pulleys and V-belts?

Proper alignment between pulleys and V-belts is essential to ensure smooth operation, minimize wear, and maximize the efficiency of the belt drive system. Here are some specific guidelines for aligning pulleys and V-belts:

  1. Parallel Alignment:
  2. The pulleys should be aligned parallel to each other, meaning that the axes of the pulleys should be in the same plane. This ensures that the V-belt runs straight and evenly between the pulleys. Misalignment can cause the belt to run at an angle, leading to increased wear and reduced efficiency.

  3. Angular Alignment:
  4. In addition to parallel alignment, the pulleys should be aligned angularly. This means that the pulley faces should be perpendicular to the belt’s direction of travel. Angular misalignment can cause the belt to twist and create uneven tension, resulting in increased wear and potential belt failure.

  5. Alignment Tools:
  6. To achieve proper alignment, various alignment tools can be used, such as straightedges, laser alignment tools, or alignment software. These tools help in measuring and adjusting the alignment of pulleys, ensuring precise parallel and angular alignment.

  7. Adjustment Methods:
  8. To adjust the alignment of pulleys, different methods can be employed. Common adjustment methods include shimming, moving the pulley on its shaft, or using adjustable pulleys. The specific method depends on the type of pulley and the adjustment capabilities of the system.

  9. Regular Inspections:
  10. Regular inspections are crucial to identify and correct any misalignment issues promptly. Inspect the pulleys visually and check for any signs of misalignment, such as uneven belt wear, belt tracking issues, or abnormal belt noise. If misalignment is detected, take corrective measures to realign the pulleys.

  11. Manufacturer Recommendations:
  12. Always refer to the manufacturer’s guidelines and specifications for pulley alignment. Manufacturers often provide specific alignment tolerances and recommendations for their products, considering factors such as belt type, load, and operating conditions. Follow these recommendations to ensure proper alignment and optimize the performance of the belt drive system.

By following these guidelines for aligning pulleys and V-belts, you can minimize wear, reduce the risk of belt failure, and maximize the efficiency and lifespan of the belt drive system.

v belt

How do you troubleshoot common issues with V-belts, such as slipping or squealing?

Troubleshooting common issues with V-belts, such as slipping or squealing, is essential to maintain the proper operation and efficiency of the belt drive system. Here are some troubleshooting steps to address these issues:

  1. Slipping:
  2. Slipping occurs when the V-belt fails to maintain proper traction with the pulleys, resulting in reduced power transmission and potential belt wear. To troubleshoot slipping issues:

    • Check the belt tension: Insufficient tension is a common cause of slipping. Ensure that the V-belt is properly tensioned according to the manufacturer’s recommendations. Adjust the tension by using the appropriate tensioning method or tools.
    • Inspect for wear or damage: Examine the V-belt for signs of wear, cracks, fraying, or other damage. A worn-out belt may not provide adequate grip and can lead to slipping. Replace the belt if necessary.
    • Check pulley alignment: Misaligned pulleys can cause the belt to slip. Verify that the pulleys are properly aligned both parallel and angularly. Adjust the pulley positions if misalignment is detected.
    • Assess pulley condition: Worn or damaged pulleys can contribute to belt slipping. Inspect the pulleys for wear, rough surfaces, or damage. If needed, replace the pulleys to ensure proper belt engagement.
    • Verify the load and application: Excessive loads or improper application can cause the belt to slip. Ensure that the belt drive system is designed and rated for the specific load requirements.
  3. Squealing:
  4. Squealing noises from V-belts are often caused by vibrations, misalignment, or improper tension. To troubleshoot squealing issues:

    • Check belt tension: Insufficient or excessive belt tension can lead to squealing. Adjust the tension to the recommended range specified by the manufacturer.
    • Inspect for wear or contamination: Check the V-belt for signs of wear, glazing, or contamination. Worn or contaminated belts may produce squealing noises. Replace the belt if necessary and eliminate any contamination from the belt or pulleys.
    • Examine pulley condition: Damaged or worn pulleys can create noise. Inspect the pulleys for wear, damage, or rough surfaces. Replace any worn or damaged pulleys.
    • Verify pulley alignment: Misaligned pulleys can cause the belt to run at an angle, resulting in noise. Ensure that the pulleys are correctly aligned both parallel and angularly. Adjust the pulley positions if misalignment is detected.
    • Check for belt glazing: Belt glazing occurs when the belt’s contact surface becomes smooth and glossy, reducing traction. If glazing is present, roughen the belt’s surface with fine sandpaper or replace the belt if necessary.
    • Assess environmental factors: Environmental conditions, such as excessive heat or humidity, can affect belt performance. Ensure that the belt drive system operates within the recommended temperature and humidity ranges.

By following these troubleshooting steps, you can identify and address common issues with V-belts, such as slipping or squealing. Regular maintenance, proper tensioning, and alignment are crucial for ensuring the smooth and efficient operation of the belt drive system.

v belt

What is a V-belt and how does it work?

A V-belt, also known as a Vee belt or a wedge belt, is a type of power transmission belt that is commonly used in various industrial applications. It is called a V-belt because of its trapezoidal cross-sectional shape, resembling the letter “V.”

The primary purpose of a V-belt is to transmit power between two rotating shafts. It does this by wrapping around the pulleys or sheaves on the shafts and creating frictional forces between the belt and the pulleys. The friction generated between the belt and the pulleys allows the belt to transfer torque from the driving pulley to the driven pulley.

The V-belt’s design provides several advantages for power transmission:

  1. High friction: The V-shaped cross-section of the belt increases the contact area with the pulleys, resulting in high frictional forces. This allows for effective power transmission even in applications with high torque or heavy loads.
  2. Belt wedging: When the V-belt is tensioned, it wedges itself deeper into the pulley grooves, enhancing the friction and preventing slippage between the belt and the pulleys. This feature is especially useful in applications where the driven pulley needs to rotate at a different speed than the driving pulley.
  3. Quiet operation: V-belts generally operate with less noise compared to other types of belts, such as flat belts. The V-shaped design helps to reduce vibrations and noise levels during power transmission.
  4. Simple installation: V-belts are relatively easy to install and replace. They can be quickly mounted on the pulleys without requiring extensive alignment procedures.

However, it’s important to note that V-belts have limitations as well. They are not suitable for applications that require precise speed control or when high-speed ratios are needed. In such cases, other power transmission methods like gear systems or synchronous belts may be more appropriate.

In summary, V-belts are commonly used power transmission belts that utilize frictional forces to transfer torque between rotating shafts. Their V-shaped design and high friction characteristics make them effective for various industrial applications.

China Standard Z10 Power Twist Drive Link V Belt for Power Transmission   with Hot selling		China Standard Z10 Power Twist Drive Link V Belt for Power Transmission   with Hot selling
editor by CX 2024-04-09