China supplier Chevron Pattern Cleat Rubber Conveyor Belting Profiled V Rubber Conveyor Belt axle car part

Product Description


Product Description


rubber conveyor belt


chevron rubber conveyor belt is also known as escort belts, they have a cleated surface that keeps loose material in place, even at steep angles. Used mainly for inclined conveyors of more than 18 degree angles, our C15 range can carry materials up to inclines of 30°, and our C25 range up to 40°. 

Belt width 

Depending upon the profile, chevron belts are available in widths from 400 mm to 1600 mm.


Chevron Belts are normally supplied with cut edges. However, Belts with moulded edges can also be supplied.

Profile height 

profile height can choose from 5mm (low chevron) to 32mm (high chevron).

Pattern shape 

close V, open V, close Y, open Y, close U, open U 

Our drawing picture for different shape



belt thickness:  3+1.5,4+2, 5+2, 6+2, 8+3, 3+0 etc

Belt width: 400-2600mm

belt length: 50-400m

tensile strength: 8-25mpa

Application:  stone, cement plant, coal mine, copper mine 

Edge:  moulded edge or cut edge

The common ep conveyor belt type could be:

2-ply belts: 315/2 400/2 500/2 630/2 800/2

3-ply belts: 500/3  630/3 800/3 1000/3 1250/3

4-ply belts:  630/4 800/4 1000/4 1250/4 1600/4

5-ply belts:  800/5 1000/5 1250/5 1600/5 2000/5

Quality control

we have several professional quality inspectors to make sure all the belts meet customer’s requirement before shipping goods.

before production
we will check to use correct raw material to make belt before manufacturing

during production
we will check production line to avoid any thing dropped on the belt 

after production
we will check the thickness&width&length of each belt to ensure enough size, after that, then we will check the belt tensile strength, break resistance, abrasion loss, adhesion.

Packaging & Shipping

packing: we usually use pp bag for plain belt, and metal rack for chevron belt and sidewall belt.

delivery:  2 weeks after getting your prepayment 

Other type conveyor belt

we can make these kinds of rubber conveyor belts as below.

chevron conveyor belt

sidewall conveyor belt

steel cord conveyor belt

rough top conveyor belt

pipe conveyor belt

Installation Instructions

our belt is widely used in minning industry, construction industry, life , agriculture field, etc

mining industry like transport copper ore, stone, coal.

construction industry like transport gravel, sand, cement, wood, concrete.

agriculture field like transport fertilizer, crops

life area like transport life garbage,airport parcel.

Related other product we make

we also have below products can make

rubber sheet SBR/NBR/CR/EPDM

pulley lagging sheet

coin rubber mat/diamond rubber mat/checker rubber mat

latex rubber sheet

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Type: EP100
Material: Rubber
Inside Material: Fabric
Feature: Oil-Resistant, Acid And Alkali Resistant, Tear-Resistant, Heat-Resistant, Cold-Resistant, Wear-Resistant
Tensile Strength: 10MPa/12MPa/14MPa/15MPa/17MPa/20MPa/24MPa
Application: Stone Crusher, Cement Plant, Mining, Agriculture
US$ 50/Piece
1 Piece(Min.Order)

Request Sample



Customized Request

v belt

Can V-belts be used in environments with high temperatures or humidity?

V-belts can be used in environments with high temperatures or humidity, but it is important to consider the specific conditions and choose the appropriate belt material and design to ensure reliable and long-lasting performance. Here are some considerations regarding the use of V-belts in such environments:

  1. Temperature Resistance:
  2. V-belts are available in different materials that offer varying levels of temperature resistance. Standard V-belts made from materials like rubber or neoprene can typically withstand temperatures within a range of -30°C to 80°C (-22°F to 176°F). However, for applications with higher temperatures, specialized high-temperature belts made from materials like silicone or EPDM (ethylene propylene diene monomer) can be used, which can withstand temperatures up to 150°C (302°F) or even higher.

  3. Heat Dissipation:
  4. In high-temperature environments, heat dissipation becomes crucial to prevent belt degradation. Adequate ventilation and cooling measures should be in place to dissipate heat generated during belt operation. This can help maintain the integrity of the belt material and prevent premature wear or failure.

  5. Humidity and Moisture:
  6. V-belts can generally tolerate moderate levels of humidity and moisture. However, in environments with high humidity or exposure to water, it is important to select belts with moisture-resistant properties. Some V-belts come with special coatings or treatments that enhance their resistance to moisture, preventing swelling, deterioration, or loss of strength.

  7. Chemical Resistance:
  8. In certain high-temperature or high-humidity environments, there might be exposure to chemicals or contaminants. It is crucial to choose V-belt materials that are resistant to the specific chemicals present in the environment. Chemical-resistant belts, such as those made from materials like polyurethane or fluorocarbon elastomers, can withstand the effects of chemicals and maintain their performance.

  9. Regular Inspections and Maintenance:
  10. In any environment, but especially in high-temperature or high-humidity conditions, regular inspections and maintenance are essential. Periodic checks for signs of wear, cracking, glazing, or other forms of belt deterioration should be conducted. Prompt replacement of worn-out or damaged belts will help prevent unexpected failures and minimize downtime.

By considering these factors and selecting V-belts specifically designed for high-temperature or high-humidity environments, you can ensure proper performance, longevity, and reliability in such operating conditions.

v belt

What are the factors that affect the lifespan and efficiency of V-belts?

The lifespan and efficiency of V-belts can be influenced by several factors. Here are the key factors that can affect the performance of V-belts:

  1. Belt Tension:
  2. Proper belt tension is crucial for the longevity and efficiency of V-belts. Insufficient tension can cause slippage, while excessive tension can lead to excessive load on the belt and other components. It is important to follow the manufacturer’s recommendations for the correct tension range.

  3. Belt Alignment:
  4. Poor belt alignment can cause uneven wear, increased friction, and reduced efficiency. Misaligned pulleys can cause the belt to run at an angle, resulting in premature wear and potential failure. Regularly check and adjust the alignment of pulleys to ensure proper belt tracking.

  5. Belt Condition:
  6. The condition of the V-belt itself is a significant factor in its lifespan and efficiency. Regularly inspect the belt for signs of wear, cracks, fraying, or glazing. Replace worn-out or damaged belts promptly to avoid further issues.

  7. Maintenance and Lubrication:
  8. Proper maintenance and lubrication can significantly extend the lifespan of V-belts. Adequate lubrication reduces friction and heat buildup, which helps to prevent premature wear and cracking. Follow the manufacturer’s recommendations for lubrication intervals and use the appropriate lubricant.

  9. Operating Conditions:
  10. Operating conditions, such as temperature, humidity, and exposure to chemicals or contaminants, can affect the performance of V-belts. Extreme temperatures can cause the belt material to deteriorate, while exposure to chemicals or contaminants can lead to belt degradation. Ensure that the operating conditions are within the recommended range for the specific V-belt.

  11. Load and Application:
  12. The load and application requirements also impact the lifespan and efficiency of V-belts. Excessive loads or improper application can cause excessive stress on the belt, leading to premature failure. Ensure that the V-belt is appropriately sized and rated for the specific load and application.

By considering these factors and implementing proper maintenance practices, such as regular inspections, correct tensioning, alignment checks, and appropriate lubrication, you can maximize the lifespan and efficiency of V-belts in your applications.

v belt

How do you properly install and tension a V-belt for optimal performance?

Proper installation and tensioning of a V-belt are crucial for achieving optimal performance and ensuring its longevity. Here are the steps to properly install and tension a V-belt:

  1. Select the appropriate V-belt: Determine the correct V-belt size and type based on the application requirements, including pulley diameters, power transmission needs, and environmental factors.
  2. Clean the pulleys: Ensure that the pulleys are clean and free from any contaminants, such as dirt, debris, or oil. Clean the pulley grooves using a brush or compressed air to ensure proper belt grip.
  3. Inspect the pulleys: Check the pulleys for any signs of wear, damage, or misalignment. Replace or repair any damaged or worn-out pulleys before proceeding with the installation.
  4. Place the V-belt on the pulleys: Position the V-belt on the pulleys, ensuring that it is properly seated in the pulley grooves. Make sure the belt is correctly aligned with the pulleys and is not twisted or kinked.
  5. Adjust the center distance: If necessary, adjust the center distance between the driving and driven pulleys to the recommended specifications provided by the manufacturer. This ensures proper belt tension and alignment.
  6. Tension the V-belt: The correct tension is crucial for optimal V-belt performance. Use a tension gauge to measure the belt’s tension. Follow the manufacturer’s guidelines or recommended tension specifications for the specific V-belt type and application.
  7. Apply tension gradually: Apply tension to the V-belt gradually and evenly. Avoid sudden or excessive tensioning, as it can lead to belt damage or pulley misalignment. Follow the recommended tensioning procedure provided by the manufacturer.
  8. Check the belt tension: After tensioning the belt, recheck the tension using a tension gauge. Ensure that the tension falls within the recommended range for the specific V-belt type and application. Adjust the tension if necessary.
  9. Verify alignment: Confirm that the pulleys are aligned properly. Check for any misalignment or belt tracking issues. Make adjustments as required to ensure the belt runs smoothly and centrally on the pulleys.
  10. Perform a test run: After installation and tensioning, perform a test run of the V-belt system. Monitor the belt’s performance, including proper grip, minimal vibration, and absence of noise. Address any issues or abnormalities promptly.

It is important to refer to the manufacturer’s guidelines and specifications for the specific V-belt type and application. They may provide additional instructions or considerations for installation and tensioning.

By following these steps and adhering to the manufacturer’s recommendations, you can ensure the proper installation and tensioning of a V-belt, leading to optimal performance, reduced wear, and extended belt life.

China supplier Chevron Pattern Cleat Rubber Conveyor Belting Profiled V Rubber Conveyor Belt   axle car partChina supplier Chevron Pattern Cleat Rubber Conveyor Belting Profiled V Rubber Conveyor Belt   axle car part
editor by CX 2024-04-09