Tag Archives: head pulley

China Large Diameter 630mm Hot Sale Conveyor Belt Idler Roller Drum Head Pulleys pulley band

Product Description

Large Diameter 630mm Scorching Sale Conveyor Belt Idler Roller Drum Head Pulleys

Type Belt width(mm) Common Diameter(mm) Duration(mm)
Drive pulley five hundred five hundred Length of the pulley depends on the belt width of the conveyor
650 five hundred~630
800 630~a thousand
one thousand 800~1150
1200 800~1150
1400 1000~1350
1600 1150~1600
1800 1150~1800
2000 1350~2000
2200 1600~2200
2400 1800~2400
Bend pulley 500 250~five hundred
650 250~630
800 250~1000
1000 250~1600
1200 250~1600
1400 315~1600
1600 400~1600
1800 400~1600
2000 five hundred~1600
2200 630~1600
2400 800~1600

 Benefits:

one. Dust-proof & Water-evidence
The speak to-sealing is adopted, which enjoys far more superior dustproof and water-resistant
2. Low Vibration and Noise
Static stability examination to make certain G40 precision amount.
3. Powerful Pressure of Friction
The content for shaft is solid shaft of 40Cr instead of #forty five spherical metal,which enhances mechanical property
four. Straightforward Installation & Straightforward Servicing
The bearing block and taper-lock are ground, which make certain the installation precision
5. Min 50000 several hours service life

1.)Pipe: seamless steel : it was specifically lower by using the flame slicing device.

2.)The sleeve & disc :it was lower by employing the laser cutter equipment precisely.

 

3.)Shaft: We chose forty five# round metal & sleeve and procedure the complete shaft so that it guarantees shaft concentricity and reduction for the eccentric shaft force. It make confident the pulley go much more stable

4.)Bearing set & bearing: higher-high quality bearing which is scorching charging and bearing block are equipped inner bearing enlargement device, so the bearing can be easily pushed to the bearing position  and it avoids the bearing hurt from the beating.

Tests for the pulley

We have the professional screening equipment for the pulley.    We require make the reducing interior pressure remedies when the pulley’s face up to forces exceed 80KN and we will make the static  balance inspection when the belt speed exceeds 2.5m/s.  
And we laso make the Drum dynamic stability check for the pulley to confirm the good top quality ahead of despatched to the buyer.

Packing:
After all the merchandise analyzed then make the packing, then the merchandise place into the warehouse to wait to send to the consumer
Our initiatives:
Exhitbition and the customer checking out~
We also show up at numerous varieties of related exhibitations to know far more our items for the client. This sort of as Canton reasonable, buma honest andother minging fairs.
Our business and goods get the client approve and several buyer vist us and make the orders for us.

Company certificate &honor
We have the ISO 9001 certification The goods have acquired numerous patents. For case in point: Logos, patents,ects.

Following sale service
We supply the consumer greatest following sale providers, and we fix the troubles any time.
 

one)Installation guidebook

2)Supply drawings and directions

three)On-website advice of dispatched engineers

4)Item right after sales:

The device has a prolonged guarantee of 2 years

Roller warranty fifty,000 several hours.

The business introduction:
 HangZhou CZPT conveying Equipment Co.,Ltd was founded in 2005.      
It truly is registered cash is eleven.68million CNY and It is non-public joint-inventory business. Our major merchandise are cnoveyor roller,idler,frame, pulley,belt and belt conveyor method for TD75 ,DTII,DTIIA,CEMA ects.
we has big lathes, numerical handle, double pressing equipment, double welding machine, double dull lathe, milling device, sawing device and so on. The merchandise have received various patents. We can make a lot more than 1 thousand rollers and 10 pulleys per day.
We have the professionalQC dept. to preserve the very good high quality just before the items despatched out. The goods are marketed to Middle East,Africa ,Australia,Europe,Southeast Asia,Russia and some other countries and locations. We will Bolster the internal administration and boost our products’ high quality constantly.We will supply the best items for consumers from the starting to the finish.


FAQ

one.Q: Your bearing type and brand name typically use? 
 A:Big ball bearing sort deep ball bearing withSRB, and in accordance to customer’s demands. 

two.Q: How is your Payment Expression? 
A: T/T or L/C. One more payment time period we can also examine. 

three.Q: Can you customize it? 
A: We support customization in accordance to your request. 

four.Q: What’s the MOQ? 
A: 3 piece. 

five.Q: What’s the creation ability of your conveyor pulley? 
20 pcs/day.

six.Q: What’s your roller’s life time?
Our pulley have a long life time with excellent efficiency and generally
make confident 30000 to 50000 several hours below the standard website and procedure.

Get in touch with us: 
Contact person: Sunny Li
 

 

Material: Carbon Steel
Surface Treatment: Baking Paint
Motor Type: No Motor
Installation: Horizontal
Bearing: Self-Aligning Ball Bearings
Pulley Lagging Type: Heat/Thermal Vulcanized Rubber Casting, Rubber Lag

###

Customization:
Available

|


###

Type Belt width(mm) Standard Diameter(mm) Length(mm)
Drive pulley 500 500 Length of the pulley depends on the belt width of the conveyor
650 500~630
800 630~1000
1000 800~1150
1200 800~1150
1400 1000~1350
1600 1150~1600
1800 1150~1800
2000 1350~2000
2200 1600~2200
2400 1800~2400
Bend pulley 500 250~500
650 250~630
800 250~1000
1000 250~1600
1200 250~1600
1400 315~1600
1600 400~1600
1800 400~1600
2000 500~1600
2200 630~1600
2400 800~1600
Material: Carbon Steel
Surface Treatment: Baking Paint
Motor Type: No Motor
Installation: Horizontal
Bearing: Self-Aligning Ball Bearings
Pulley Lagging Type: Heat/Thermal Vulcanized Rubber Casting, Rubber Lag

###

Customization:
Available

|


###

Type Belt width(mm) Standard Diameter(mm) Length(mm)
Drive pulley 500 500 Length of the pulley depends on the belt width of the conveyor
650 500~630
800 630~1000
1000 800~1150
1200 800~1150
1400 1000~1350
1600 1150~1600
1800 1150~1800
2000 1350~2000
2200 1600~2200
2400 1800~2400
Bend pulley 500 250~500
650 250~630
800 250~1000
1000 250~1600
1200 250~1600
1400 315~1600
1600 400~1600
1800 400~1600
2000 500~1600
2200 630~1600
2400 800~1600

What makes pulleys so important?

A pulley is a simple tool that makes it easy to lift or move heavy objects. There are many uses for this tool, but let’s take a look at their mechanical advantages. There are several types and many applications, along with their benefits and costs. So what makes them so important? Read on to find out! Below are some of the most common uses for pulleys. Let’s dive into them.
pulley

Mechanical advantage

If you’ve ever used rope and pulley systems, you’ve probably noticed their usefulness. A 3:1 mechanical advantage system is like a 300-pound load being moved one foot up by three feet of rope. Then you can imagine using the same rope to get into a small space. The same principle applies to limited spaces, and a simple mechanical advantage system is just what you need for this purpose.
Assuming frictionless bearings, a single movable pulley can have two mechanical advantages. It is attached to a heavy object and requires the pulling force exerted by the jack to lift the heavy object. However, when you use a compound pulley, the force exerted on the rope to lift the object changes direction. The three factors used to measure machine efficiency are force, distance, and relative motion.
The mechanical advantage of the pulley is that it reduces the effort required to lift weights. When the rope is attached to the two wheels, applying a force of 500 Newtons can lift a mass of 100 kg. This mechanical advantage is why two rings in a pulley are better than one. Therefore, using a pulley system will save you energy. You can also use branches instead of ropes and pulleys.

type

There are several different types of pulleys. They can be simple or complex, depending on how they are connected. Simple pulleys have a grooved wheel on one end and are attached to an axle. These pulleys are used to lift heavy objects. They are often found on sailboats, and you can even see them on construction sites. On the other hand, stationary pulleys are attached to stationary structures, such as flagpoles. Fixed pulleys can also be used to lift loads from trucks or trains. Pulleys are also commonly used in wells.
Fixed pulley systems use rollers or single wheels. These pulleys are usually made of nylon or wire rope. They are used in heavy duty applications. They are also used in electric motors. A “V” pulley requires a “V” belt to transmit power. Some of these pulleys have multiple “V” grooves to reduce the risk of power slipping. Once installed, fixed pulleys are suitable for many applications.
Simple pulleys are simple pulleys. It has a pulley mounted on an axle and a rope at one end. Rope can be used to pull objects, while plastic pulleys can carry lighter loads. There are two main types: heavy duty and simple pulley systems. In either case, their function is the same: they change the direction in which the seat belt is fastened. So when comparing the two, it’s easy to decide which one is best for you.
pulley

application

Pulley systems are simple machines used for a variety of industrial and mechanical tasks. Its design parameters and benefits have improved over the years, but they remain essential for many applications. Let’s take a look at some of the most common applications of pulleys. The applications for pulley systems are endless, from construction to mining, from transportation to packaging. Read on to learn more!
Pulley systems are often used to lift large objects, such as blocks, that might otherwise be too heavy to lift. It also makes the exploration process easier by helping people pull heavy objects into place. It is also widely used on sailing ships. Due to its low cost of use and no need for lubrication, it is a practical choice for many applications. It can be used to lift heavy objects and support long ropes.
The pulley system allows you to change the force required to move the object. For example, a two-wheel pulley system is especially useful for reducing the effort required to lift large objects. The mechanical advantage increases with the number of wheels in the system. In addition, the mechanical advantage of a two-wheel pulley system depends on the ratio of the load weight to the number of rope segments in the system.

cost

In most cases, an idler replacement will cost around $150, but the exact cost will depend on several factors, including the make and model of the car. The cost also depends on the type of idler you need and the cost of the OEM parts. Some pulleys are easy to replace at home, while others require specialized tools, such as pulley wrenches. The chart below shows the cost of popular vehicles. Prices are valid at the time of writing.
The diameter of the pulley is also important, this should be about 60% of the diameter of the active pulley. You can also purchase compensating pulleys at factory prices. Be sure to select the correct size before placing the pulley on the machine. Also, make sure you have enough space for the pulleys. Once you have the desired pulley size, you can determine the best type of belt to install.
While this method is the most common type of belt drive, there are other methods of spinning cup blanks directly from a flat metal disk. One such method is described in US Patent No. 5,500,31. US Patent No. 1,728,002 and shows a method of making a dynamically balanced V-groove pulley. Using a headstock die with sliders increases the cost of the pulley. In addition, different cup blanks require different molds.

lubricating

The lubrication of pulley bearings is relatively simple. The pulley itself rotates smoothly with little vibration. Bearing contact loads are relatively low, and well-lubricated pulleys operate near ambient temperatures. Here are some tips for properly lubricating pulley bearings. Make sure to lubricate the nozzle before applying grease.
Check grease, elastic ring, pulley bearing clearance once a year. If the elastic ring of the pulley is damaged or the roller bearing on the associated pulley is damaged, replace the pulley. Also, check the running noise of the pulleys to see if they are making noise. Check the bearing, damage to the elastic ring may indicate bearing failure or roller failure.
Proper lubrication is critical to the life of the rotating pinion. Avoid exposure to sunlight or water. Protects the pinion meshing area from hard impurities. Liaise with crane operators and lubricators during maintenance and lubrication operations. They should know how to avoid pitfalls in the lubrication process. In case of malfunction, please contact service personnel and take necessary measures.
pulley

Compound Pulley System

A compound pulley system is used to lift heavy objects. These systems can use ropes or cords of different sizes. In general, the total weight of all ropes must be less than the weight of a single rope. The system can be used in large areas, but may not be suitable for smaller spaces. To learn more about compound pulleys, read on! Here are some helpful tips. 1. Understand the difference between single wheel and compound wheel
A composite pulley system consists of three components: a drive pulley, one or more driven pulleys, and two pulleys. The drive wheels are usually connected to shafts that are connected to the engine or transmission. The driven wheel is a separate unit mounted on the same shaft as the drive wheel. A compound pulley system helps lift heavy loads. These pulleys are the most common type of pulley system in use today.
Composite pulley systems are widely used on construction sites. They save energy by spreading the weight of heavy loads over multiple smaller loads. This means that the elevator does not have to use high-capacity lifting equipment. Additionally, the compound pulley system allows users to easily adjust power distribution to meet their individual needs. They can also use more than two ropes if necessary. This increases the range of motion of the lift arm.

China Large Diameter 630mm Hot Sale Conveyor Belt Idler Roller Drum Head Pulleys     pulley band	China Large Diameter 630mm Hot Sale Conveyor Belt Idler Roller Drum Head Pulleys     pulley band
editor by CX 2023-04-03

China Industrial Conveyor Head Tail Pulley (Dia250-1800mm) supplier

Product Description

Industrial Conveyor Head Tail pulley (Dia250-1800mm)


Huayue Conveyor Pulley Specification: 
one. Pulley Diameter: 250-1800mm. 
two. Belt width: 300mm to 2400mm. 
three. Size: Rely on the belt width. 
four. Welding: carbon dioxide arc welding, argon arc welding, electrode welding and so forth. in accordance with AWS common or substitute welding standard
5. Lagging: Cold lagging scorching vulcanized lagging, ceramic lagging
6. Pulley tube material: Q235 seamless carbon steel. 
7. Specialist pulley manufacturing line. 
8. Specialist designing and inspection team. 
9. Certification: ISO, BV, etc

Kind of Conveyor Pulley: 
conveyor tail pulley
conveyor head pulley
conveyor rubber lagging pulley
conveyor steel pulley
conveyor driving pulley
conveyor turnaround pulley
Pattern conveyor pulley
Conveyor pulley
Rubber conveyor pulley
Head pulley and so forth. 

Conveyor Head Tail pulley: 
Head pulley can be divided into driving pulley (head pulley) and thurn about pulley (tail pulley), driving pulley is the principal portion for transmitting the power: clean area and rubber surface, and rubber surface area can be categorized into clean rubber area, herringbone rubber area and CZPT rubber surface to fulfill diverse technological specifications. Averting pulley can be categorised into sleek rubber area and clean steel area. 

Development
All the pulley undertake built-in bearing housing which is lubricated and loaded with grease and has 2 sorts: iron casting and steel casting, the shaft is made of forty five#steel, the shell adopt weld assembly. 

Our greatest top quality based mostly on: 
Manufacturer 
 Experience in Cooperate with Fortune 500 Companies
 Professional Engineering Functionality
 Stable Top quality
 Reasonable Price tag
 Small Orders Recognized
 Continuous Enhancements
 High Merchandise Efficiency
 Prompt Supply
 Professional Service

For more details, make sure you inquiry us! 
Polyester conveyor belt, (EP)
Nylon conveyor belt, (NN)
Cotton conveyor belt, (CC)
Sidewall conveyor belt (SW)
Metal Wire conveyor belt ( ST )
Chevron conveyor belt, (C5 C10 and C15)
Oil Resistance conveyor belt, (OR and MOR)
Hot Resistance conveyor belt, (HR)
Fireplace Resistance conveyor belt, (FR/PVC/PVG)
Heat Resistance conveyor belt, (HR/ FR)
Chilly Resistance conveyor belts, (CR)
Pattern conveyor belt ( 30+ Moulds)
Metal Mesh conveyor belt (Warmth resistant temp until finally 800c)
Limitless belts
Conveyor roller, idler
Conveyor Pulley, body, bracket and so forth

Kind Belt width (mm) Standard Diameter(mm)  Length (mm) 
Drive  Head Pulley five hundred 500 Length of the pulley depends on
 the belt width of the conveyor
650 five hundred, 630
800 five hundred, 630, 800
1000 630, 800, 1000
1200 630, 800, 1000
1400 800, 1000
 Tail Pulley 500 250, 315, 400, 500
650 250, 315, 400, 500
800 250, 315, 400, 500, 630, 800, 1000
1000 250, 315, 400, 500, 630, 800, 1000
1200 250, 315, 400, 500, 630, 800, 1000
1400 250, 315, 400, 500, 630, 800, 1000

US $10
/ Piece
|
10 Pieces

(Min. Order)

###

Type: Handling Machinery
Material: 45# Steel, Rubber and etc
Color: Available
Certificate: ISO9001, SGS, Bureau Veritas
Application: Coal Mining Industry, Cement
Bearing: SKF, FAG, NSK, NTN, Hrb etc

###

Customization:

###

Type Belt width (mm) Standard Diameter(mm)  Length (mm) 
Drive  Head Pulley 500 500 Length of the pulley depends on
 the belt width of the conveyor
650 500, 630
800 500, 630, 800
1000 630, 800, 1000
1200 630, 800, 1000
1400 800, 1000
 Tail Pulley 500 250, 315, 400, 500
650 250, 315, 400, 500
800 250, 315, 400, 500, 630, 800, 1000
1000 250, 315, 400, 500, 630, 800, 1000
1200 250, 315, 400, 500, 630, 800, 1000
1400 250, 315, 400, 500, 630, 800, 1000
US $10
/ Piece
|
10 Pieces

(Min. Order)

###

Type: Handling Machinery
Material: 45# Steel, Rubber and etc
Color: Available
Certificate: ISO9001, SGS, Bureau Veritas
Application: Coal Mining Industry, Cement
Bearing: SKF, FAG, NSK, NTN, Hrb etc

###

Customization:

###

Type Belt width (mm) Standard Diameter(mm)  Length (mm) 
Drive  Head Pulley 500 500 Length of the pulley depends on
 the belt width of the conveyor
650 500, 630
800 500, 630, 800
1000 630, 800, 1000
1200 630, 800, 1000
1400 800, 1000
 Tail Pulley 500 250, 315, 400, 500
650 250, 315, 400, 500
800 250, 315, 400, 500, 630, 800, 1000
1000 250, 315, 400, 500, 630, 800, 1000
1200 250, 315, 400, 500, 630, 800, 1000
1400 250, 315, 400, 500, 630, 800, 1000

What is a pulley?

Pulleys are shafts or wheels on a shaft that support the movement and change of direction of a taut cable. The pulley also transfers power from the shaft to the cable. A simple pulley is used to raise the school flag. Read on to learn about the basic types of pulleys. We also covered the use of pulleys in everyday life. Read on to learn more about this important mechanical part.
pulley

composite pulley

A composite pulley is a mechanical system where two or more pulleys and ropes are connected together. It reduces the force required to lift the load because the force is divided by the distance of each pulley. Distance is equal to the mass of the object. Composite pulleys are a common mechanical system on sailboats. Composite pulleys can be used to lift heavy equipment such as sails.
The compound pulley unit consists of two pulleys, one fixed and the other movable. The fixed pulley is fixed overhead, while the movable pulley is connected to the load by a chain. The lift applies force to the other end of the rope. Anchor points are attached to fixed joists, ceiling joists or sturdy branches. The chain should be long enough to support the load during lifting.
Composite pulleys can be made from a variety of materials. Some are fixed and remain fixed. Others are detachable. The composite pulley combines the advantages of both types, making it a versatile tool. In the table below, these three types of pulleys are compared. It’s easy to see which one is best for your needs. The right choice depends on your specific needs and budget.
The compound pulley system consists of two fixed pulleys and one movable pulley. The compound pulley system multiplies the force by a factor of 2. The compound pulley system is particularly suitable for heavy loads and is ideal for construction sites. Workers apply less than half the load force on the composite pulley, significantly reducing the force required. This is a major benefit for many people.

Fixed pulley

Fixed pulleys are fixed gears of fixed length that are mounted on solid objects. There are many different types of pulley systems. Some cooperate with each other, but not “fixed”.
Fixed pulleys can be used for a variety of purposes. One application is to lift small objects. They have a one-to-one mechanical advantage. Often, a single pulley can lift small loads. The force required to lift a single fixed pulley remains the same. They are usually used to lift lighter objects. They can even be attached to buckets used to draw water from wells.
While single fixed pulleys have desirable mechanical advantages, they are not suitable for force multipliers. Because their mechanical advantage diminishes over time, they are not effective force multipliers. They are used to redirect work so that it can be applied in the most convenient direction. This mechanical advantage is the main advantage of fixed pulleys and the most common way of moving objects. They have several benefits, including the ability to increase the speed of moving objects.
Another application for fixed pulleys is lifting supplies. A scaffold can weigh more than one and can be directly hoisted. In order to facilitate the transportation of materials, fixed pulleys are usually installed on the top of the scaffolding on construction sites. Then thread the rope through the edge of the groove that holds the pulley. The fixed pulley exerts the same force on the pull side as on the push side. The same is true for moving objects with fixed pulleys.
pulley

moving pulley

A movable pulley is a device whose part is fixed to another object, usually a rod or beam. The movable part moves with the load, making the load feel lighter. This is a useful tool for those who need to carry heavy items such as large bags. The advantages of moving pulleys are many. Here are some of them. Read on to learn more about them.
One of the most common uses of movable pulley systems is climbing high objects. Climbers act as pulley loads and pull ropes to lift objects. Eventually, when the traction stops, the climber descends. However, it is still a useful tool in other situations. The movable pulley system can help you climb the tallest objects or lift them to level surfaces.
Another example of movable pulleys is in industry. Depending on the load, movable pulleys make handling and moving loads easier. You can use them in a variety of applications in manufacturing and industry, including cleaning. For example, the American flag is raised and lowered every day. Removable pulleys are a handy tool when buildings need cleaning.
If you’re not sure whether a task requires a pulley, a zipline might be a good option. Connect the two ends of the rope and the pulley will move along the rope, then attach the rope to the metal cable. The load is the person holding the pulley, and the force comes from the attachment on the other end of the rope. There are two types of live pulleys: simple pulleys with just one wheel and live pulleys with many ropes attached.

School flag raised with simple pulleys

How is the school flag raised? It is pulled up by a rope attached to a pulley at the top of the pole. When the rope is pulled, the pulley turns, raising the flag. A pulley is a simple mechanism that helps people move heavier objects with ease. The rope must be securely attached to the pulley to keep the flag stable.
A simple pulley is a spinning wheel with grooves on one side and ropes on the other. The rope can be any length and the wheels can be any size. The rope has to go through the groove and the load is attached to the other end of the rope. Simple pulleys are pulleys with fixed shafts. An example is the wheel on a school flagpole.
A simple pulley system consists of a primary pole, a secondary pole and an outer member. The primary flagpole is connected to the track by a detour, while the secondary flagpole is connected to the track by a pipe. There is a groove on one side of the track, which passes through the inner cavity of the flagpole. An open track at the upper end of the track connects the two parts of the pulley.
A simple pulley can be used for many purposes. This is a useful machine that can be used to raise the flag. Among other things, it can be used in clothing lines, bird feeders, and even roofers. And, of course, you can use the pulley to raise the flag. Its versatility makes it an essential part of school decor.
pulley

cast iron pulley

If you are looking for pulleys for your machine, you may come across cast iron pulleys. They are usually cheap and available in a variety of sizes. The rim is held in place by a mesh attached to a central boss. The arms and spokes can be straight or curved, but most are oval. There are many uses for this type of pulley.
You might wonder why the arms of cast iron pulleys are so curved. Bent arms tend to yield rather than break. Cast iron pulleys are usually round with a slight bump on the rim, which helps keep the belt centered on the rim as it moves. On a 300mm diameter pulley, the bumps may be as small as 9mm.

China Industrial Conveyor Head Tail Pulley (Dia250-1800mm)     supplier China Industrial Conveyor Head Tail Pulley (Dia250-1800mm)     supplier
editor by czh 2023-01-31

China Belt Conveyor Carbon Steel Head Drum Pulley with Rubber Lagging for Conveyor System pulley bearing

Product Description

Belt Conveyor Carbon Metal Head Drum Pulley with Rubber Lagging for Conveyor Method

YILUN conveyor pully is produced as for each consumer need, with main style unfer nationwide standard, top quality inspection focusing on shaft core, welded joint, rubber material and hardness, dynamic harmony and so on for for a longer time product lifetime.

Our items are widely employed in thermal electrical power era, harbours, cement vegetation, metallurgy and as nicely as the gentle duty conveying gadgets for industries.

Solution Parameters

Software recycling sector
power business
parcel transport sector
petro industry
coal mining business
cement concrete business
machining sector
Pipe/Tube/Shell 1)Content:Q235 Steel
2)Diameter:219mm-3  

US $300
/ Piece
|
1 Piece

(Min. Order)

###

Material: Carbon Steel
Surface Treatment: Rubber Lagging
Motor Type: Without Motor
Installation: with Reducer
Pulley Length: 500-5000mm
Pulley Diameter: 219mm-3000mm

###

Customization:

###

Application recycling industry
power industry
parcel transport industry
petro industry
coal mining industry
cement concrete industry
machining industry
Pipe/Tube/Shell 1)Material:Q235 Steel
2)Diameter:219mm-3000mm
3)Length:500mm-5000mm,depends on the belt width of the conveyor
Shaft/Axis Material:#45 Steel
Bearing Big roving crack, deep groove ball with double sealing
Welding Pipe and bearing housing with automatic welding
Surface Smooth steel color surface,  rubber lagging surface
Color Red,green,blue or as require
Working life ≥30000 hours
Standard GB,ISO,DIN,CEMA,JIS
Special can be customized according to customer or design for customer
Supply Ability 50 pcs per day
Certificate ISO9001:2008, BV, SGS

###

Conveyor Pulley  Test  
1. All butt welds shall be full Penetration
2. All welds to be full seal welds to prevent rust
3. Shell seam welds are submerged arc (SAW)
4. Includes stress relieving of shell prior to machining
5. Ultrasonic testing of all shafts
6. Drillings for Temperature probe / vibration analysis device
7. Remove all butts and sharp edges
Conveyor Pulley Shaft Selection  
The major cause of conveyor pulley failure is excessive shaft deflection. The Conveyor Pulleys – Beijing HSCD Engineering department can perform Stress Analysis and Finite Element Analysis to maximize your conveyor pulley performance. 
 
Conveyor Pulley Shell Material  
Q345B Carbon Steel
GR350 Carbon Steel
ANSI 4140 Alloy Steel
ASTM A514B Stainless Steel
Bearing House   SKF/NSK/ /HRB/LYC, as customer request. 
Conveyor Pulley Lagging  
Plain rubber lagging, Herringbone and Diamond grooves are all available 
. Hot Vulcanised Durometer 
. Hardness 50-55-65 Shore A, M Grade
. Oil Resistant, Heat Resistant FRAS
Comprising  
•Drive pulley, Head pulley and Tail Pulleys
•Take-Up Pulleys,
•Snub pulley & Bend Pulleys
•Self Cleaning Spiral Wing pulley & Drum Pulleys
Significant advantages  
• The thick pulley shell absorbs more stress.
• The large crown angle provides superior belt tracking capabilities.
• True concentric machining provides:
• maximum contact with the belt,
• consistent belt content discharge,
• less deflection of shaft,
• less stress on the bearings
Available
Conveyor Pulley Designs
 
•Liveshaft or Deadshaft types.
•Flat or crowned shell.
•Taconite, labyrinth or speciality seals.
•Oil or grease lubricated.
•Self centering or low pressure lock element designs.
Belt Conveyor Carbon Steel Head Drum Pulley with Rubber Lagging for Conveyor System
US $300
/ Piece
|
1 Piece

(Min. Order)

###

Material: Carbon Steel
Surface Treatment: Rubber Lagging
Motor Type: Without Motor
Installation: with Reducer
Pulley Length: 500-5000mm
Pulley Diameter: 219mm-3000mm

###

Customization:

###

Application recycling industry
power industry
parcel transport industry
petro industry
coal mining industry
cement concrete industry
machining industry
Pipe/Tube/Shell 1)Material:Q235 Steel
2)Diameter:219mm-3000mm
3)Length:500mm-5000mm,depends on the belt width of the conveyor
Shaft/Axis Material:#45 Steel
Bearing Big roving crack, deep groove ball with double sealing
Welding Pipe and bearing housing with automatic welding
Surface Smooth steel color surface,  rubber lagging surface
Color Red,green,blue or as require
Working life ≥30000 hours
Standard GB,ISO,DIN,CEMA,JIS
Special can be customized according to customer or design for customer
Supply Ability 50 pcs per day
Certificate ISO9001:2008, BV, SGS

###

Conveyor Pulley  Test  
1. All butt welds shall be full Penetration
2. All welds to be full seal welds to prevent rust
3. Shell seam welds are submerged arc (SAW)
4. Includes stress relieving of shell prior to machining
5. Ultrasonic testing of all shafts
6. Drillings for Temperature probe / vibration analysis device
7. Remove all butts and sharp edges
Conveyor Pulley Shaft Selection  
The major cause of conveyor pulley failure is excessive shaft deflection. The Conveyor Pulleys – Beijing HSCD Engineering department can perform Stress Analysis and Finite Element Analysis to maximize your conveyor pulley performance. 
 
Conveyor Pulley Shell Material  
Q345B Carbon Steel
GR350 Carbon Steel
ANSI 4140 Alloy Steel
ASTM A514B Stainless Steel
Bearing House   SKF/NSK/ /HRB/LYC, as customer request. 
Conveyor Pulley Lagging  
Plain rubber lagging, Herringbone and Diamond grooves are all available 
. Hot Vulcanised Durometer 
. Hardness 50-55-65 Shore A, M Grade
. Oil Resistant, Heat Resistant FRAS
Comprising  
•Drive pulley, Head pulley and Tail Pulleys
•Take-Up Pulleys,
•Snub pulley & Bend Pulleys
•Self Cleaning Spiral Wing pulley & Drum Pulleys
Significant advantages  
• The thick pulley shell absorbs more stress.
• The large crown angle provides superior belt tracking capabilities.
• True concentric machining provides:
• maximum contact with the belt,
• consistent belt content discharge,
• less deflection of shaft,
• less stress on the bearings
Available
Conveyor Pulley Designs
 
•Liveshaft or Deadshaft types.
•Flat or crowned shell.
•Taconite, labyrinth or speciality seals.
•Oil or grease lubricated.
•Self centering or low pressure lock element designs.
Belt Conveyor Carbon Steel Head Drum Pulley with Rubber Lagging for Conveyor System

The Mechanical Advantage of a Pulley

A pulley is an important tool for many tasks. The advantage that it offers over a hand-held mechanism is its mechanical advantage. In this article, we’ll discuss the types of pulleys and their applications. We’ll also look at the types of compound pulleys. And, of course, there’s a little bit about the mechanical advantage of a pulley. This article will help you decide whether this tool is right for your needs.
pulley

Mechanical advantage of a pulley

A pulley has a mechanical advantage over a lever because it is able to produce more force over longer distances. The mechanical advantage of a pulley sounds brilliant and could produce energy. But what exactly is this mechanical advantage? Let’s take a look. First, consider how a pulley works. A rope supports a 100kg mass, which requires 500 newtons of force to lift. If the rope supports a 100kg mass, two sections of rope can support that load. Using a pulley, you can lift the same weight with half the force.
A pulley’s ideal mechanical advantage is the ratio of the force applied to the total length of the rope. The larger the radius, the greater the mechanical advantage. A pulley made up of four rope segments has an ideal mechanical advantage of four. Therefore, a four-segment pulley would multiply the force applied by four. As the numbers on the rope segments are smaller than the total length of the rope, it would be better to use a compound pulley.
The mechanical advantage of a pulley can be calculated by using the T-method. The first step in calculating the mechanical advantage of a pulley is defining the force you need to lift. Then, divide that force by two to calculate the amount of force you need to lift the load. Once you know this amount, you can design a pulley to meet your needs. That way, you can achieve the perfect balance between the two types of pulleys.

Types of pulleys

The main function of the pulley is to change the direction of the force. The mechanical advantages of a single pulley are two. Ideally, two pulleys should have two or more mechanical advantages. The mechanical advantage of compound pulleys can be increased to two or more. The number of pulleys that make up the composite pulley will determine the mechanical advantage. Certain types of pulleys are combined in one housing.
A stepped pulley is a set of pulleys with stepped surfaces. Each face is anchored to the mid-axis in an ordered sequence. This design gives these pulleys their name. They are used to increase and decrease the speed of the driven pulley. Step pulleys are usually used in pairs. They can be straight or stepped, but usually come in pairs.
The three main types of pulleys are pulleys, rope pulleys, and chain pulleys. Pulley Pulley systems use mechanics to lift and lower heavy objects. The Greek historian Plutarch credits the invention of the pulley to Archimedes of ancient Sicily. The Mesopotamians used rope pulleys to lift water around 1500 BC, and Stonehenge is said to have been built using a rope pulley system.
pulley

Application of pulley system

The advantages of using a pulley system are numerous. The ability to lift heavy objects is a good example. The pulley system makes it easy for people to lift blocks and other large objects. It can be used in many different applications, from utility elevators to construction cranes. In addition, it is widely used on sailing boats. If you want to learn more about the benefits of a pulley system, keep reading!
You can use the pulley system to water flowers or water plants. Some of them even lowered the pot to make cleaning easier. Pendant lights are another great place to install a pulley system. Climbing and fishing are just some of the activities that utilize the pulley. They are great for fishing and gardening. And since they are so versatile, you can use the pulley system anywhere.
To get the most out of your pulley system, you must choose a product that has all of the above attributes. A high-quality pulley must have a large pulley diameter and be made of sturdy materials. The cables must also be properly supported in the pulleys to ensure a long service life for your investment. A good cable should have minimal cracks and be lubricated. These factors are the most important considerations when choosing a pulley system for your needs.

composite pulley

Composite pulley systems combine two or more movable pulleys. These systems maximize the force to move the weight and can also change direction so they can be used to lift weights. Composite pulley systems can be as simple or as complex as your needs. For example, a pulley pulley system uses multiple pulleys on each axis. This method is often used for hoisting building materials.
A compound pulley system has two or more rope segments, each of which is pulled up on a load. It can increase lift by making objects move faster. These systems are common on large sailboats and construction sites. Composite pulleys are also available for larger boats. Due to their versatility, they are versatile tools for construction sites and large sailboats. If you have their app, you should consider buying one.
The main advantage of composite pulleys is their versatility. You can use them to lift weights or use them to save energy. Composite pulleys are especially useful for lifting heavy objects. For example, you can tie a paper clip to the end of the rope and pull it up. The flag is then lifted into the air with the help of compound pulleys. Composite pulleys are a great invention and they are often used in construction.

security considerations

There are several safety considerations to consider when using pulleys. The first is Secure Workload (SWL). This value is a general guideline for the maximum weight a pulley can safely handle. It varies according to the height and angle of the pulley. Besides SWL, there are some other factors to consider. Consider each one before deciding on the pulley that best suits your needs.
Another safety consideration is the weight of the load. Since the highs of the pulley are higher than the lows, it doubles in weight. The weight of the high point should not exceed 4 kN. The safety factor is calculated by multiplying the strength of the pulley by the weight of the load. Secondary COD has a safety factor of 10:1 and bulletproof primary anchors should be used with pulleys.
If using a chain hoist, you must be trained in the appropriate type of lifting. It is important not to hang on the top hooks of the structure, nor to overload or rig the hooks with multiple slings. You should also avoid corroded or damaged chains, as they can cause the crane to jam or overload. A worn chain can even cause the load to drop.
pulley

Components of a pulley system

Proper design of the pulley system can increase the life of the cables and pulleys. Larger diameter cables should be selected as they are more durable than smaller diameter cables. The cables should also be supported in the pulley grooves. The pulley must be designed to be compatible with the cable and its lubrication should be optimal. Proper lubrication of cables and pulleys will ensure maximum durability and longevity.
The first type of pulley is called a fast pulley. These pulleys are used for quick start and stop of the machine. These pulleys are usually mounted in pairs on the countershaft of the machine. One pulley is tightly mounted on the machine shaft, while the other pulley is fitted with a free-spinning mechanism. When the machine is running, the belt is mounted on the tensioner pulley, and when it is stopped, the belt slides on the independent pulley.
Composite pulley sets reduce the overall effort required by reducing the size of the pulley. These are usually attributed to Archimedes. Flat pulleys are often used in flat belt driven transmission systems. These are used in high-speed, low-power applications. Flat pulley idlers are also used on the back of traditional V-belts.

China Belt Conveyor Carbon Steel Head Drum Pulley with Rubber Lagging for Conveyor System     pulley bearing	China Belt Conveyor Carbon Steel Head Drum Pulley with Rubber Lagging for Conveyor System     pulley bearing
editor by czh 2022-12-24