Product Description
CHEVRON PATTERN V CLEAT CONVEYOR BELT (EP,NN,CC,ENDLESS)
Top 5 conveyor belt manufacture in china
CZPT Chevron Pattern V Cleat Conveyor Belt Competitive Advantage
l Plies: 1-10ply
l width (BW): 400-1400mm
l Thickness: 4-30mm
l Pattern pitch(CW):125mm-500mm
l Type: Open V close V, Ltype, H type, Utype, multi-Vtype, etc.
l Height of pattern(CH): 5 mm, 10mm, 15mm, 17mm, 25mm, 32mm.
l Pattern can be designed according to the customers’ requirement.
l Abrasion resistant & High Tensile Strength
l ISO9001:2008, SGS ,Bureau Veritas Certificate.
l More Than 30 years professional experience.(Since 1982)
l International Standard: DIN, BS, AS, RMA, AS, JISK, SABS etc
FEATURES :
1. Can carry loose materials at angle of 17-18 and bagged material at 30-35
2. Cleat angle and pitch are designed for smooth travel over return idlers
3. Cleats and the top cover rubber are mono block molding for strength
APPLICATION:
There are open type and closed type, suitable for bulk or bagged materials such as powder and granule with incline less than 45 C.
patterned conveyor belt are used primarily when the angle of incline becomes too steep for a smooth conventional conveyor belt. The belt is fitted with integrally moulded cleats which prevent the material from sliding backwards as would be the case with a smooth surface belt. Different cleat designs allow the carrying of many types of material, from bulk solids to unit loads.
TECHNICAL DATA OF RUBBER COVER:
| Tensile Strength: | ≥10Mpa |
| Elongation at Break | ≥350% |
| Adhesive strength between carcass | ≥6.0N/mm |
| Adhesive strength between cover and carcass | ≥3.0N/mm |
| Elasticity | ≥32% |
| Abrasion | ≤200mm3 |
ABOUT CZPT COMPANY
CZPT is the Top 5 manufacturers and exporters of Conveyor Belt in China. Our range of conveyor belts are highly appreciated by our clients due to its heat resistance feature and other availability in various sizes and designs. These are dimensionally accurate as per international standards.
OUR BEST QUALITY BASED ON :
Manufacturer
Experience in Cooperate with Fortune 500 Companies
Professional Engineering Capability
Stable Quality
Reasonable Price
Small Orders Accepted
Continuous Improvements
High Product Performance
Prompt Delivery
Professional Service
FOR MORE DETAILS,PLEASE INQUIRY US!
Polyester conveyor belt, (EP)
Nylon conveyor belt, (NN)
Cotton conveyor belt, (CC)
Sidewall conveyor belt (SW)
Steel Cord conveyor belt ( ST )
Chevron conveyor belt, (C5 C10 and C15)
Oil Resistance conveyor belt, (OR and MOR)
Hot Resistance conveyor belt, (HR)
Fire Resistance conveyor belt, (FR/PVC/PVG)
Heat Resistance conveyor belt, (HR/ FR)
Cold Resistance conveyor belts, (CR)
Pattern conveyor belt ( 30+ Moulds)
Metal Mesh conveyor belt (Heat resistant temp until 800c)
Endless belts
Conveyor roller, idler
Conveyor Pulley, frame,bracket etc /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Type: | Conveyor Belt |
|---|---|
| Feature: | Wear-resistant, Heat-resistant, Tear-resistant, Flame-resistant, Cold-resistant |
| Usage: | Handling Machinery |
| Performance: | Strong Rubber Conveyor Belt |
| Standards: | GB, DIN, BS, as, Rma, Jisk, ISO |
| Certificate: | ISO, BV, SGS, Sans |
| Customization: |
Available
| Customized Request |
|---|
How do you calculate the power rating and speed capacity of a V-belt system?
Calculating the power rating and speed capacity of a V-belt system involves considering various factors such as belt type, pulley dimensions, belt tension, and speed. Here’s a general overview of the calculations involved:
- Power Rating Calculation:
- Speed Capacity Calculation:
To calculate the power rating of a V-belt system, you need to determine the maximum power that the belt can transmit without slipping or experiencing excessive wear. The power rating is typically expressed in horsepower (HP) or kilowatts (kW).
The formula for calculating the power rating is:
Power (HP or kW) = (Tension in belt (lb or N) * Belt speed (ft/min or m/s)) / 33,000 (for HP) or 1,000 (for kW)
The tension in the belt can be determined based on the design requirements of the system and is influenced by factors such as the type of application and the desired safety factor.
The speed capacity of a V-belt system is the maximum rotational speed at which the belt can operate without experiencing excessive vibration or failure. It is typically expressed in revolutions per minute (RPM).
The formula for calculating the speed capacity is:
Speed (RPM) = (Belt pitch diameter (in or mm) * π * Belt speed (ft/min or m/s)) / 12 (for in) or 1000 (for mm)
The belt pitch diameter is determined based on the pulley dimensions and is the effective diameter at which the belt engages with the pulley.
It’s important to note that these calculations provide general guidelines, and actual power rating and speed capacity may vary depending on the specific belt and pulley design, as well as other factors such as belt tensioning, environmental conditions, and system efficiency. It is recommended to consult the belt manufacturer’s guidelines or seek assistance from an engineer experienced in power transmission systems to ensure accurate calculations and appropriate belt selection for a given application.
What are the factors that affect the lifespan and efficiency of V-belts?
The lifespan and efficiency of V-belts can be influenced by several factors. Here are the key factors that can affect the performance of V-belts:
- Belt Tension:
- Belt Alignment:
- Belt Condition:
- Maintenance and Lubrication:
- Operating Conditions:
- Load and Application:
Proper belt tension is crucial for the longevity and efficiency of V-belts. Insufficient tension can cause slippage, while excessive tension can lead to excessive load on the belt and other components. It is important to follow the manufacturer’s recommendations for the correct tension range.
Poor belt alignment can cause uneven wear, increased friction, and reduced efficiency. Misaligned pulleys can cause the belt to run at an angle, resulting in premature wear and potential failure. Regularly check and adjust the alignment of pulleys to ensure proper belt tracking.
The condition of the V-belt itself is a significant factor in its lifespan and efficiency. Regularly inspect the belt for signs of wear, cracks, fraying, or glazing. Replace worn-out or damaged belts promptly to avoid further issues.
Proper maintenance and lubrication can significantly extend the lifespan of V-belts. Adequate lubrication reduces friction and heat buildup, which helps to prevent premature wear and cracking. Follow the manufacturer’s recommendations for lubrication intervals and use the appropriate lubricant.
Operating conditions, such as temperature, humidity, and exposure to chemicals or contaminants, can affect the performance of V-belts. Extreme temperatures can cause the belt material to deteriorate, while exposure to chemicals or contaminants can lead to belt degradation. Ensure that the operating conditions are within the recommended range for the specific V-belt.
The load and application requirements also impact the lifespan and efficiency of V-belts. Excessive loads or improper application can cause excessive stress on the belt, leading to premature failure. Ensure that the V-belt is appropriately sized and rated for the specific load and application.
By considering these factors and implementing proper maintenance practices, such as regular inspections, correct tensioning, alignment checks, and appropriate lubrication, you can maximize the lifespan and efficiency of V-belts in your applications.
What are the different types of V-belts available and their applications?
There are several types of V-belts available, each designed for specific applications and requirements. The most common types of V-belts include:
- Classic V-belts: Also known as conventional V-belts, these are the standard V-belts with a trapezoidal cross-section. They are widely used in various industrial applications for general power transmission, such as in HVAC systems, agricultural machinery, and industrial equipment.
- Narrow V-belts: Narrow V-belts are narrower than classic V-belts and have a narrower V-shaped profile. They are suitable for applications where space is limited or where high-speed ratios are required. These belts are commonly used in automotive engines, power tools, and small appliances.
- Wedge V-belts: Wedge V-belts, also known as narrow section V-belts, have a wider and deeper V-shaped cross-section compared to classic V-belts. This design allows for higher power transmission capacity and better resistance to belt slippage. Wedge V-belts are used in heavy-duty applications, such as in industrial machinery, mining equipment, and large agricultural machinery.
- Double V-belts: Double V-belts consist of two V-belts joined side by side. These belts provide increased power transmission capacity and are commonly used in applications where high torque is required, such as in heavy-duty machinery, pumps, and compressors.
- Variable Speed V-belts: Variable speed V-belts, also known as V-ribbed belts or multi-rib belts, have a ribbed surface on one side of the belt. This design allows for improved flexibility and enhanced power transmission efficiency. Variable speed V-belts are commonly used in automotive engines, industrial machinery, and appliances where variable speed control is required.
The choice of V-belt type depends on factors such as the power transmission requirements, space limitations, speed ratios, and the specific application. It is important to select the appropriate V-belt type based on these factors to ensure efficient and reliable power transmission.
In summary, the different types of V-belts available include classic V-belts, narrow V-belts, wedge V-belts, double V-belts, and variable speed V-belts. Each type has its own characteristics and is suitable for specific applications based on power transmission needs and requirements.
editor by CX 2024-04-30